Skip to content

UV Machine Hull: darmstadtium casing + 2 yttrium barium cuprate cables (PPS foil + PVC foil + silicone) + 288 mB PEEK

Chain id: uv_hull · Tags: Infinite source, Unverified

Era setup: UV · Abydos

Plan modules: UV hull

Tips: 6, 1 unverified

Machines

LV Bender · circuit 1LV
Darmstadtium IngotDarmstadtium ingot (fusion fluid → solidifier)8
up to 32 EU/t
Darmstadtium Plate8 Darmstadtium plate1 / ingot
gtceu:lv_bender
LV Assembler · circuit 8 · 2.5 s · 16 EU/tLV
Darmstadtium Plate8 Darmstadtium plate8
up to 32 EU/t2.5 s
UV Machine Casing1
gtceu:lv_assembler
LV Assembler · 5 s · 8 EU/t (cable)LV
Oak 11 YBCO single wire · 1 PPS foil · 1 PVC foil · 72 mB silicone rubberYBCO single wirePPS foilPVC foilSilicone rubber2 crafts
up to 32 EU/t5 s
Yttrium Barium Cuprate Single Cable2 YBCO single cable2
gtceu:lv_assembler
LV Assembler · 2.5 s · 16 EU/t (hull)LV
UV Machine Casing1Yttrium Barium Cuprate Single Cable2 YBCO single cable2Polyether Ether Ketone288 mB PEEK (uv_peek)288 mB
up to 32 EU/t2.5 s
UV Machine Hull1
gtceu:lv_assembler

Flow

Direct steps

  • YBCO ingot → wiremill → single wire → 1 YBCO single wire · 1 PPS foil · 1 PVC foil · 72 mB silicone rubber (1)

How to build

  1. Drawers first: darmstadtium ingots, YBCO single wire, PPS foil, PVC foil. Drums: silicone rubber (or SBR) and PEEK. One dedicated assembler per product (plate bender, casing, cable, hull), each behind its own router or Pipez item pipe with Item Filters and a Robot Arm cover in Keep Exact mode on the output. — functionalstorage:oak_1, gtceu:darmstadtium_ingot, gtceu:yttrium_barium_cuprate_single_wire, gtceu:polyphenylene_sulfide_foil
  2. LV Bender, circuit 1: 1 darmstadtium ingot → 1 plate. 8 plates per casing; output drawer Keep Exact 16. — gtceu:lv_bender, gtceu:darmstadtium_plate
  3. LV Assembler, circuit 8: 8 plates → 1 UV Machine Casing in 2.5 s at 16 EU/t. Keep Exact 4 on the casing drawer. — gtceu:lv_assembler, gtceu:uv_machine_casing
  4. YBCO wire: a wiremill on the ingot, single wire, circuit 1. Then the cable assembler: wire + PPS foil + PVC foil + 72 mB silicone rubber → 1 YBCO single cable in 5 s at 8 EU/t. Two per hull. — gtceu:lv_wiremill, gtceu:yttrium_barium_cuprate_single_cable
  5. Hull assembler: casing + 2 YBCO cables + 288 mB PEEK → UV Machine Hull in 2.5 s at 16 EU/t. PEEK by a Pipez fluid pipe from its drum. — gtceu:lv_assembler, gtceu:polyether_ether_ketone_bucket, gtceu:uv_machine_hull
  6. Output drawer Keep Exact 8. Hulls feed every UV hatch, bus, component machine and fusion casing. — functionalstorage:oak_1, gtceu:uv_machine_hull

Tips

  • Recipes. Casing (MachineRecipeLoader casing_uv): 8 darmstadtium plates, assembler circuit 8, 50 ticks at 16 EU/t (crafting-table alternative: 8 plates around a wrench). Hull: the pack replaces the GT hull for LuV, ZPM and UV (kjs additions/machines_and_parts/tiered_machines/singleblocks.js luvUVMachines): casing + 2 tier single cables + 288 mB of the TIER PLASTIC, assembler 50 ticks at 16 EU/t; shaped alternative: middle row PEEK plate, darmstadtium plate, PEEK plate; bottom row cable, casing, cable. For UV the cable is yttrium barium cuprate and the plastic is POLYETHER ETHER KETONE (pack tier data, uv), NOT PBI (the base GT recipe data still shows the PBI version, the pack removes it).
  • Cable (WireRecipeHandler): YBCO is above LuV so the single cable needs, in the assembler at 100 ticks and 8 EU/t, 1 single wire + 1 polyphenylene sulfide foil + 1 PVC foil + 72 mB silicone rubber (or 36 mB styrene butadiene rubber). Two per hull. YBCO ingot: EBF 4500 K from the mixer dust (yttrium, barium, copper, oxygen); Unverified: the mixer recipe, the yttrium and barium sources (the abyss harvesting script also lists the ingot as an output: kjs systems/resource_gen/abyss_harvesting.js).
  • Darmstadtium: the fusion reactor MK II recipe (see zpm_fusion): 288 mB arsenic + 144 mB ruthenium → 144 mB darmstadtium in 28.8 s, then a fluid solidifier (ingot mold) and a bender. A casing is 8 plates = 8 ingots = 1152 mB; with the 2 YBCO cables and 288 mB PEEK a hull costs about 1152 mB darmstadtium. Each UV machine, hatch and the fusion reactor starts from one.
  • What the hull unlocks in this guide: UV energy input/dynamo hatch (uv_hatches), UV bus and hatch (UV I/O recipes use hull + enriched naquadah crate/drum + 324 mB PEEK), UV transformer (hull + 1 europium cable + 4 YBCO cables + 2 UHPIC chips), UV components (uv_components), UV circuit assembler and the UV research parts. UV voltage coils are in uv_hatches.
  • Sub-steps people skip: (1) bender plates on circuit 1, casing on circuit 8; (2) PPS foil is mandatory for the cable; (3) the UV hull uses PEEK, not PBI; the PEEK line (uv_peek) must exist first; (4) keep 6 casings spare for the UV fusion casings and the UV laser hatches.
  • Unverified YBCO mixer recipe and the yttrium / barium sources.

Bill of materials

Item Qty
gtceu:lv_assembler 3
gtceu:lv_bender 1
gtceu:lv_wiremill 1
functionalstorage:oak_1 10
modularrouters:modular_router 6
gtceu:lv_robot_arm 6
gtceu:item_filter 6
pipez:item_pipe 16
pipez:fluid_pipe 3
gtceu:steel_drum 2

Needs / Feeds