Skip to content

Data Module (sterile circuit assembler) and the data item per CWU/t: orb below 32, module from 32, data DNA disk from 160, component data core from 320

Chain id: uv_data · Tags: Infinite source, Unverified

Era setup: UV · Abydos

Plan modules: Research data and CWU power

Tips: 4, 1 unverified

Machines

ZPM Circuit Assembler · 20 s · 38 400 EU/t · STERILE CleanroomZPM
Oak 1Wetware printed circuit board · 2 ZPM circuit · 32 RAM chip · 64 NOR chip · 64 NAND chip · 32 fine YBCO wire · double solderWetware printed circuit boardRAM chipNOR chipNAND chipFine YBCO wire1
up to 131 072 EU/t20 s
Data Module1
gtceu:zpm_circuit_assembler
Research Station · 32 to 159 CWU/t · module + scan itemGregTech
Data Module1
Advanced Data Access HatchAdvanced Data Access Hatch (module slot) → Assembly Linerecipe data
gtceu:research_station

Flow

How to build

  1. Drawers first: printed boards (1), ZPM circuits (2), RAM (32), NOR (64), NAND (64), fine YBCO wire (32). Drum: soldering alloy. The assembler sits in the Sterile Cleanroom. — functionalstorage:oak_1, gtceu:wetware_printed_circuit_board, gtceu:nor_memory_chip, gtceu:nand_memory_chip
  2. ZPM circuit assembler: 20 s per module at 38 400 EU/t. Output drawer Keep Exact 4. — gtceu:zpm_circuit_assembler, gtceu:data_module
  3. Research Station: module + the scan item in the Object Holder; the CWU/t of the recipe must be available. — gtceu:research_station, gtceu:data_module
  4. Put the written module into the Assembly Line’s Advanced Data Access Hatch (or the Data Bank). — gtceu:advanced_data_access_hatch, gtceu:assembly_line
  5. Easy to miss: label modules with an item frame: all written modules look alike. — functionalstorage:oak_1, gtceu:data_module

Tips

  • Data Module (gtsrc CircuitRecipes data_module, not changed by the pack): circuit assembler in the STERILE cleanroom, 400 ticks at 38 400 EU/t, 1 wetware printed circuit board + 2 ZPM circuits + 32 RAM + 64 NOR + 64 NAND + 32 fine YBCO wire with the double solder multiplier. Data item rule of the pack’s own research recipes (kjs utils/helpers/recipe_helpers.js getDataItem): below 32 CWU/t a data orb, from 32 a data module, from 160 a data DNA disk (circuit assembler, sterile, 400 ticks at V[UHV]: runic printed board + 2 UHV circuits + 24 QRAM + 16 hyper NOR + 16 hyper NAND + 32 fine europium wire + 144 mB ITLC solder), from 320 a component data core (UIV). The Assembly Line research recipes use the GT default carrier: Unverified which one the fork writes at 48 to 144 CWU/t (GT default: module above 32), so build a module before you try the UV hatch (64 CWU/t).
  • What needs a module here: every UV research (hatch 64, components 32 / 48, wetware computer 64, mainframe 96, fusion 96, drilling rig 144, chemical plant 64) and the UHV component parts (128 / 144). The Advanced Data Access Hatch (ZPM era, zpm_data) accepts orbs, sticks and modules; a Data Bank shares them between lines. Write the module in the Research Station with the scan item in the Object Holder.
  • Sub-steps people skip: (1) the data module is made in the STERILE room while the circuit assemblers are in the normal one; (2) each recipe needs its own module: 12+ modules for the UV era; (3) NOR and NAND chips by the hundred: 64 + 64 per module; (4) a research that overwrites a module with a different recipe needs a fresh one (GT clears NBT with a shapeless recipe: gtceu data_module_nbt).
  • Unverified data carrier used by assembly line research at 48 to 144 CWU/t.

Bill of materials

Item Qty
gtceu:zpm_circuit_assembler 1
gtceu:research_station 1
gtceu:advanced_data_access_hatch 2
gtceu:data_bank 1
functionalstorage:oak_1 10
modularrouters:modular_router 6
gtceu:lv_robot_arm 6
gtceu:item_filter 8
pipez:item_pipe 16
pipez:fluid_pipe 2
gtceu:steel_drum 2

Needs / Feeds

  • Main source for: gtceu:data_module, start_core:data_dna_disk