Skip to content

UV components 2/2: robot arm, emitter, sensor and field generator (Assembly Line, gravi stars, 96 naquadria foil each, research 32 / 48 CWU/t)

Chain id: uv_components2 · Tags: Infinite source, Unverified

Era setup: UV · Abydos

Plan modules: UV components and hatches

Tips: 6, 1 unverified

Machines

Assembly Line · 30 s · 122 880 EU/tMultiblock
Oak 14 long tritan steel rod · gear · 3 small gear · 2 motor · piston · 1 UV + 2 ZPM + 4 LuV circuit · 4 YBCO cable · 1152 mB solder · 1000 mB lubricant · 576 mB naquadriaUV motorUV pistonTritan steel gearSmall tritan steel gear1
30 s
UV Robot Arm1
gtceu:assembly_line
Assembly Line · 30 s · 122 880 EU/t · 48 CWU/t researchMultiblock
Oak 1tritan steel frame · motor · 4 long rod · gravi star · 2 UV circuit · 96 naquadria foil · 4 YBCO cable · 1152 mB solder · 576 mB naquadriaTritan steel frameGravi starNaquadria foil1
30 s
UV Emitter1
gtceu:assembly_line
Assembly Line · 30 s · 122 880 EU/t · 48 CWU/t researchMultiblock
Oak 1tritan steel frame · motor · 4 plate · gravi star · 2 UV circuit · 96 naquadria foil · 4 YBCO cable · 1152 mB solder · 576 mB naquadriaTritan steel plate1
30 s
UV Sensor1
gtceu:assembly_line
Assembly Line · 30 s · 122 880 EU/t · 48 CWU/t researchMultiblock
Oak 1frame · 6 plate · gravi star · 2 UV emitter · 2 UV circuit · 128 fine ENTED wire · 4 YBCO cable · 2304 mB solder · 576 mB naquadriaFine ENTED wire1
30 s
UV Field Generator1
gtceu:assembly_line

Flow

Direct steps

  • UV Emitter → frame · 6 plate · gravi star · 2 UV emitter · 2 UV circuit · 128 fine ENTED wire · 4 YBCO cable · 2304 mB solder · 576 mB naquadria (2)

How to build

  1. Drawers first, one per input: motors (Keep Exact 4), piston, circuits (UV, ZPM, LuV), tritan steel frames / plates / rods / gears, gravi stars, naquadria foil (Keep Exact 64 × 2), fine ENTED wire, YBCO cables. Drums: ITLC solder, lubricant, naquadria. — functionalstorage:oak_1, gtceu:uv_electric_motor, gtceu:gravi_star, gtceu:naquadria_foil
  2. Research: ZPM emitter, sensor and field generator at 48 CWU/t / 491 520 EU/t each, the arm at 32 CWU/t / 122 880 EU/t. One orb per item; orbs into the matching line. — gtceu:research_station, gtceu:zpm_emitter, gtceu:data_orb
  3. Arm line and emitter line: 30 s each. The arm’s three circuit tiers come from three different drawers (UV, ZPM, LuV): label them. — gtceu:assembly_line, gtceu:uv_robot_arm, gtceu:uv_emitter
  4. Sensor line: frame, motor, 4 plates, gravi star, 2 circuits, 96 foil, 4 cables; fluid hatches for solder + naquadria. — gtceu:assembly_line, gtceu:uv_sensor
  5. Field generator line last: two emitters by router from the emitter drawer, 128 fine ENTED wire, 6 plates, frame, gravi star. — gtceu:assembly_line, gtceu:uv_field_generator
  6. Output drawers Keep Exact 2 (field generators 2). They feed the UV fusion reactor (2 ZPM ones, not UV) and the fusion casings (ZPM generator each). — functionalstorage:oak_1, gtceu:uv_field_generator

Tips

  • Source: kjs luv_to_uv_components.js with the uv column of tier_data.js (verified). Robot arm: 4 long tritan steel rods + 1 tritan steel gear + 3 small gears + 2 UV motors + 1 UV piston + 1 UV circuit + 2 ZPM circuits + 4 LuV circuits (the arm asks for three circuit tiers: uv / zpm / luv) + 4 YBCO single cables; 1152 mB solder, 1000 mB lubricant, 576 mB naquadria. Emitter: 1 tritan steel frame + 1 UV motor + 4 long rods + 1 gravi star + 2 UV circuits + 96 naquadria foil (64 + 32) + 4 cables; 1152 mB solder + 576 mB naquadria. Sensor: same but 4 tritan steel plates instead of the long rods (frame, motor, 4 plates, gravi star, 2 circuits, 96 naquadria foil, 4 cables). Field generator: 1 frame + 6 plates + 1 gravi star + 2 UV emitters + 2 UV circuits + 128 fine ENTED wire (64 + 64) + 4 cables; 2304 mB solder + 576 mB naquadria.
  • Research: the arm is DEFAULT research (32 CWU/t, 122 880 EU/t, scanned from the ZPM arm). Emitter, sensor and field generator are SPECIAL research: 48 CWU/t at 491 520 EU/t (VA[UV]), scanned from the ZPM emitter / sensor / field generator. The recipes sit at 122 880 EU/t, so the Assembly Line only needs ZPM power, but the Research Station needs a UV-tier hatch for the research EU/t (491 520 EU/t: ZPM 4A hatch). 48 CWU/t is one HPCA fully populated with 3 advanced components (uv_research).
  • Circuits per component: robot arm 1 UV + 2 ZPM + 4 LuV; emitter 2 UV; sensor 2 UV; field generator 2 UV + 2 UV emitters = 6 UV circuits. A hull-based machine of the UV tier usually needs 1 to 2 emitters or sensors: UV circuits and naquadria foil are the real cost. Gravi star: quantum star + 288 mB neutronium in an IV autoclave (uv_gravi), so every emitter, sensor and field generator needs a neutronium feed.
  • Naquadria foil: 96 foil = 24 ingots (a plate gives 4 foil) per emitter or sensor: that is 3456 mB of naquadria per component and a naquadria line (zpm_naq_products) that runs at fusion-reactor scale (the neutronium run takes 288 mB of it as well).
  • Sub-steps people skip: (1) emitters first (2 per field generator), the field generator is the LAST item; (2) 128 fine ENTED wire = 16 ingots of the UV superconductor; (3) gravi stars from Keep Exact 4 drawers; (4) the arm needs a UV PISTON and 2 motors, so build the piston line of uv_components first; (5) one Data Bank holds all research orbs.
  • Unverified nothing beyond the sources of americium, pure netherite, naquadria, dysprosium.

Bill of materials

Item Qty
gtceu:assembly_line 4
gtceu:research_station 1
gtceu:data_bank 1
gtceu:zpm_energy_input_hatch 2
functionalstorage:oak_1 26
modularrouters:modular_router 14
gtceu:lv_robot_arm 14
gtceu:item_filter 20
pipez:item_pipe 16
pipez:fluid_pipe 5
gtceu:steel_drum 6

Needs / Feeds

  • Main source for: gtceu:uv_robot_arm, gtceu:uv_emitter, gtceu:uv_sensor, gtceu:uv_field_generator