Skip to content

UIV Machine Hull: 8 chaotixic alloy plates → casing, + 2 polonium bismide single cables + 288 mB PEDOT:PSS plastic

Chain id: uiv_hull · Tags: Infinite source, Unverified

Era setup: UIV · End & Draconic

Plan modules: UIV hull, parts, hatches and components

Tips: 6, 1 unverified

Machines

LV Bender · circuit 1LV
Chaotixic Alloy IngotChaotixic alloy ingot (uiv_alloys)8
up to 32 EU/t
Chaotixic Alloy Plate8 Chaotixic alloy plate1 / ingot
gtceu:lv_bender
LV Assembler · circuit 8 · 2.5 s · 16 EU/tLV
Chaotixic Alloy Plate8 Chaotixic alloy plate8
up to 32 EU/t2.5 s
UIV Machine Casing1
gtceu:lv_assembler
LV Assembler · 2.5 s · 16 EU/t (hull)LV
UIV Machine Casing1Polonium Bismide Single CablePolonium bismide single wire · foils · rubber (cable)2Poly 34 Ethylenedioxythiophene Polystyrene Sulfonate288 mB PEDOT:PSS plastic288 mB
up to 32 EU/t2.5 s
UIV Machine Hull1
gtceu:lv_assembler

Flow

How to build

  1. Drawers first: chaotixic alloy ingots, polonium bismide single cables. One drum for PEDOT:PSS. One dedicated machine per product (bender, casing assembler, hull assembler), each behind its own router or Pipez item pipe with Item Filters and a Robot Arm cover in Keep Exact mode. — functionalstorage:oak_1, gtceu:chaotixic_alloy_ingot, gtceu:polonium_bismide_single_cable
  2. LV Bender, circuit 1: 1 ingot → 1 plate. 8 plates per casing; output drawer Keep Exact 16. — gtceu:lv_bender, gtceu:chaotixic_alloy_plate
  3. LV Assembler, circuit 8: 8 plates → 1 casing in 2.5 s at 16 EU/t. Keep Exact 4 on the casing drawer. — gtceu:lv_assembler, gtceu:uiv_machine_casing
  4. Hull assembler: casing + 2 cables from their drawer + 288 mB PEDOT:PSS by a Pipez fluid pipe from the drum → hull in 2.5 s at 16 EU/t. — gtceu:lv_assembler, gtceu:poly_34_ethylenedioxythiophene_polystyrene_sulfonate_bucket, gtceu:uiv_machine_hull
  5. Output drawer Keep Exact 8. Every UIV energy hatch, transformer, parallel hatch and component starts here. — functionalstorage:oak_1, gtceu:uiv_machine_hull

Tips

  • Recipes (kjs additions/machines_and_parts/tiered_machines/singleblocks.js, postUVMachines): casing = 8 chaotixic alloy plates, assembler circuit 8, 50 ticks, 16 EU/t (crafting table: 8 plates around a wrench). Hull = casing + 2 polonium bismide single cables + 288 mB poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), assembler 50 ticks, 16 EU/t; crafting-table alternative: plastic plate, tier plate, plastic plate over cable, casing, cable. Same shape as the UV hull; the only change from ZPM is the materials.
  • Materials from tier_data.js: tier plate chaotixic alloy, cable polonium bismide, wire hafnide ito ceramic (electric furnace/blaster style machines use the double and quadruple wire), glass draco resilient fusion glass, solder naquadated soldering alloy. Casing multiblock recipes in casings.js use the same alloy, so the plate stock is shared.
  • The pack removes every GregTech recipe whose output or input starts with gtceu:uiv (singleblocks.js top) and re-adds only: hull, casing, and the machines listed there (furnace, blaster, assembler, circuit assembler, etc. in the crafting table). Only the hull, energy hatches, transformers, laser hatches, parallel hatch, rotor holder and sterile maintenance paths are traced for this guide; for any other UIV singleblock check the recipe browser. Unverified: whether the plastic fluid needs a dedicated drum line (PEDOT:PSS recipe not traced here).
  • Where the alloy comes from: Hell Forge plasma, then Cryostate Quantum Chiller, then a vacuum freezer with an ingot mold (see uiv_alloys). Cable: polonium bismide wire from its own line (Unverified route; the pack does not list it under the nether lines). Cable needs foils and rubber like the lower tiers: Unverified which ones (WireRecipeHandler for superconductors).
  • Sub-steps people skip: (1) plates on the bender with circuit 1, casing on circuit 8; (2) 3 hulls spare for the fusion and rotor holder recipes, which each eat one; (3) keep plastic in a drum with a Pipez fluid pipe, not a bucket by hand: one hull is 288 mB; (4) hulls are the input of every UIV hatch and of the field generator line.
  • Unverified cable source, plastic route, exact cable foil inputs.

Bill of materials

Item Qty
gtceu:lv_assembler 2
gtceu:lv_bender 1
functionalstorage:oak_1 8
modularrouters:modular_router 4
gtceu:lv_robot_arm 4
gtceu:item_filter 4
pipez:item_pipe 16
pipez:fluid_pipe 2
gtceu:steel_drum 1

Needs / Feeds