Skip to content

LV circuit line (Basic Electronic Circuit)

Chain id: comp_circuit_lv · Tags: Infinite source

Era setup: LV

Plan modules: LV circuits

Tips: 3

Machines

MixerLV
Large Arboreal ExtractorOak tree extractor · resininfiniteresinCharcoal Dust
up to 32 EU/t
Glue500 mB
gtceu:lv_mixer
Assembler · boardLV
Copper Foil4 Copper foilWood PlateWood plate (3 slabs)Glue100 mB
up to 32 EU/t
Resin Printed Circuit Board
gtceu:lv_assembler
Assembler · resistorsLV
Fine Copper Wire4 Fine copper wireCharcoal DustGlue100 mB
up to 32 EU/t
Resistor2 Resistors
gtceu:lv_assembler
Assembler · tubesLV
Glass TubeGlass tube (6 panes → 2)Steel BoltSteel bolt + 2 copper wireRed Alloy18 mB red alloy
up to 32 EU/t
Vacuum Tube3 Vacuum tubes
gtceu:lv_assembler
Circuit AssemblerLV
Resin Printed Circuit Board1Resistor2 Resistors2Vacuum Tube3 Vacuum tubes2Red Alloy Single Wire2 Red alloy wire2
up to 32 EU/t
Basic Electronic Circuit2 LV circuits / 10 s
gtceu:lv_circuit_assembler

Flow

How to build

  1. Glue source: a Large Arboreal Extractor built with oak logs and leaves gives resin instead of latex (same 100 mB per 20 s, 250 with fertilizer and an iron screw). — start_core:large_arboreal_extractor, minecraft:oak_log
  2. LV Mixer: 500 mB resin + 1 charcoal dust → 500 mB glue (no power: a barrel gives only 200 mB). Charcoal dust: macerate charcoal. — gtceu:lv_mixer, gtceu:charcoal_dust, gtceu:glue_bucket
  3. Board assembler: 4 copper foil (bender: 1 copper → 4 foil) + 1 wood plate (3 wooden slabs in a crafting row) + 100 mB glue → 1 circuit board in 10 s. — gtceu:lv_bender, gtceu:copper_foil, gtceu:wood_plate
  4. Resistor assembler: 1 charcoal dust + 4 fine copper wire (wiremill circuit 3: 1 copper → 8) + 100 mB glue → 2 resistors in 8 s. — gtceu:resistor, gtceu:fine_copper_wire
  5. Tube assembler: 1 glass tube + 1 steel bolt + 2 copper wires + 18 mB molten red alloy (extractor: 1 red alloy ingot → 144 mB) → 3 vacuum tubes in 2 s. Glass tubes: 6 glass panes → 2 by hand, in big batches. — gtceu:vacuum_tube, gtceu:glass_tube, gtceu:lv_extractor
  6. Circuit Assembler: 1 board + 2 resistors + 2 vacuum tubes + 2 red alloy wires → 2 LV circuits every 10 s at 16 EU/t (12 per minute). Robot Arm cover on Keep Exact 64. — gtceu:lv_circuit_assembler, gtceu:red_alloy_single_wire, gtceu:basic_electronic_circuit

Tips

  • Circuit Assembler: 1 board + 2 resistors + 2 vacuum tubes + 2 red alloy wires → 2 circuits (crafting by hand gives 1 and costs a steel plate).
  • Glue is the only farmed input: about 100 mB per circuit. One oak extractor (300 mB resin per minute, 750 with fertilizer) feeds 3–7 circuits per minute.
  • Annealed copper later doubles resistors (4 per craft) and vacuum tubes (4).

Bill of materials

Item Qty
start_core:large_arboreal_extractor 1
gtceu:lv_mixer 1
gtceu:lv_assembler 3
gtceu:lv_circuit_assembler 1
gtceu:lv_extractor 1
gtceu:lv_wiremill 1
gtceu:lv_bender 1
gtceu:lv_robot_arm 5
gtceu:item_filter 5
functionalstorage:oak_1 8
pipez:item_pipe 16
pipez:fluid_pipe 8

Needs / Feeds