Treated wood: cutter + spout

Chain id: treated_wood · Tags: Infinite source, 3D scene

Era setup: LV

Plan modules: Treated wood

Tips: 3

Machines

CutterLV

Oak LogLogs (tree farm)WaterWater 4 mB

up to 32 EU/t

Oak Planks6 PlanksWood Dust2 Wood pulpto fertilizer

gtceu:lv_cutter

Belt + SpoutCreate

Oak Planks6 Planksbrass funnelCreosoteCreosote 125 mB

Treated Wood Planks

create:spout

Flow

• Cutter → Belt + Spout

How to build

1. A Modular Router sends logs from the tree farm drawer into an LV Cutter with a little water piped in: 1 log → 6 planks + 2 wood pulp (20 s, 7 EU/t). — modularrouters:modular_router, gtceu:lv_cutter
2. Output drawer → Brass Funnel filtered to planks → a Create belt, a few planks at a time. — create:brass_funnel, create:belt_connector
3. A Spout over the belt, fed creosote from the coke ovens, fills each plank (125 mB) into a treated wood plank. The belt needs rotation from the steam engine line. — create:spout, gtceu:creosote_bucket
4. A funnel at the end stores them in a drawer. Treated planks become rods, frames and casings for the sieves, Large Farm and Large Barrel. — gtceu:treated_wood_planks, functionalstorage:oak_1

Tips

• The cutter needs a fluid: with water a log takes 20 s, with distilled water 15 s, with lubricant 10 s.
• 125 mB creosote per plank: one log in the coke oven (250 mB) treats 2 planks.
• Keep the wood pulp: it is half of the fertilizer recipe.

Bill of materials

Item	Qty
gtceu:lv_cutter	1
create:belt_connector	4
create:brass_funnel	2
create:spout	1
functionalstorage:oak_1	3
modularrouters:modular_router	1

Needs / Feeds

• Needs: Create tree farm (rotating saws + deployers)
• Feeds: Oil without oil: Pyrolyse Oven on logs, wood dust, plant balls or bio chaff, Fertilizer (for the rubber extractor and greenhouses), Phenolic printed circuit board (silver foil + etching)
• Main source for: gtceu:wood_dust, gtceu:treated_wood_planks

Extras

• 3D assembly scene with 13 blocks (open it in the Atlas page).