Skip to content

MV circuit line (Good Electronic Circuit)

Chain id: mv_circuit · Tags: Infinite source

Era setup: MV

Plan modules: MV circuits (Good Electronic Circuit)

Tips: 3

Machines

LV Circuit Assembler · 15 sLV
Basic Electronic Circuit2 LV circuits2Phenolic Printed Circuit Board1Diode2 Diodes2Copper Single Wire2 Copper wire2
up to 32 EU/t15 s
Good Electronic Circuit1
gtceu:lv_circuit_assembler
Robot Arm cover · Keep Exact 64LVGenerator
no listed input
up to 32 EU/t
Good Electronic Circuitcaps stock
gtceu:lv_robot_arm

Flow

How to build

  1. Four input drawers in front of the assembler (LV circuits, printed boards, diodes, copper wire), each filled by routers from the stock drawers of the lines above. A circuit assembler dedicated to this recipe: keep your LV circuit assembler on its own recipe. — functionalstorage:oak_1, gtceu:basic_electronic_circuit, gtceu:phenolic_printed_circuit_board, gtceu:diode
  2. LV Circuit Assembler: 1 phenolic printed circuit board + 2 LV circuits + 2 diodes + 2 copper wires → 1 Good Electronic Circuit in 15 s at 30 EU/t, so 4 a minute. — gtceu:lv_circuit_assembler, gtceu:good_electronic_circuit
  3. Output drawer with a Robot Arm cover on Keep Exact 64 and an Item Filter holding the circuit. A full output slot pauses the machine at zero draw. — gtceu:lv_robot_arm, gtceu:item_filter, gtceu:good_electronic_circuit

Tips

  • Recipe (circuit assembler, 30 EU/t, 15 s): 1 phenolic printed circuit board + 2 LV circuits + 2 diodes + 2 copper wires → 1 Good Electronic Circuit. It runs on LV power.
  • Per circuit: 1 silver ingot, 1 wood dust, 50 mB glue, 100 mB iron III chloride, 0.25 gallium + 0.25 arsenic, 2 glass blocks, 2 copper ingots (8 fine wire for the diodes + 2 wires) and 2 LV circuits.
  • The MV Circuit Assembler itself needs two HV circuits to build, so stay on the LV one for now.

Bill of materials

Item Qty
gtceu:lv_circuit_assembler 1
gtceu:lv_robot_arm 2
gtceu:item_filter 2
functionalstorage:oak_1 5
pipez:item_pipe 16

Needs / Feeds